# How Modular Housing Is Changing the Way Metal Components Are Manufactured

> Source: https://ppclaser.com.au/how-modular-housing-is-changing-the-way-metal-components-are-manufactured/  
> Author: Cameron Pryde  
> Date: 2026-11-04T09:40:49+11:00

Victoria’s growing interest in modular housing is changing more than how homes are assembled. It is also creating new opportunities for manufacturers to produce building components in controlled factory environments, ready for installation on site.

 In September 2026, [Homes Victoria](https://www.homes.vic.gov.au/news/delivering-homes-victorians-using-modern-methods-construction) announced that more than 350 homes were being delivered across the state using modern methods of construction. This includes 250 homes through a $144 million programme under the Regional Housing Fund.

 Many of these homes are being built substantially off-site before being transported to their final locations. For metal fabricators, this approach places greater emphasis on manufacturing components that can be produced to specification and incorporated into larger building assemblies.

 

## From construction sites to manufacturing floors

 Traditional construction generally involves bringing materials and trades together at the building site. Modular construction takes a different approach, with substantial sections of a building manufactured in a factory before being transported and installed.

 A recent example comes from Geelong, where [Geelong Times](https://timesnewsgroup.com.au/geelongtimes/news/geelong-modular-methods-delivering-social-housing-faster/) reported on modular social housing being manufactured at a Moolap factory.

 The homes are built around steel frames and transported in sections, with finishing work completed on site. The manufacturer, Modularity by Rendine, has been contracted to deliver more than 40 homes for the Victorian Government.

 The project demonstrates how conventional building materials and manufacturing techniques can be brought together in a different production environment.

 Rather than treating each home as an entirely separate construction project, manufacturers can develop repeatable building systems, with components produced to suit established designs.

 

## Where laser cutting and metal fabrication fit

 Modular buildings can incorporate a range of metal components, depending on their design and construction system.

 These may include connection plates, mounting brackets, folded channels, cladding components and other fabricated parts.

 For manufacturers working with sheet metal, the process often starts with turning a design into individual components.

 PPC Laser’s fibre laser cutting equipment can produce complex profiles from metal sheet, including components with mounting holes, cut-outs and other features specified in the design.

 Where a component needs to be formed rather than simply cut, CNC press brake bending provides another manufacturing step. Flat material can be bent into angles, channels and other profiles suitable for the intended application.

 PPC Laser’s press brake has a bending length of 4,100 mm, allowing it to accommodate a range of longer sheet-metal components, subject to material and tooling requirements.

 These are among the processes available through [PPC Laser’s capabilities](https://ppclaser.com.au/capabilities/), which extend beyond laser cutting to include a range of specialist metalworking equipment.

 

## Different components call for different manufacturing methods

 Not every component in a modular building requires laser cutting.

 For long, narrow strips of sheet metal, such as those used to manufacture flashings, PPC Laser’s slit-to-length equipment can process material directly from a coil.

 A hydraulic guillotine provides another option for straight cuts, while specialist folding equipment can produce more intricate profiles.

 PPC Laser also has clinching equipment, which can mechanically join suitable thin-gauge metal components without drilling holes or using conventional fasteners.

 Each method has a different application. The appropriate process depends on the material, component geometry, joining requirements and finished specification.

 Having access to several manufacturing methods allows a fabricator to consider the complete component rather than treating every requirement as a laser cutting job.

 

## Why coordination matters in off-site construction

 Moving construction into a factory does not eliminate the need for careful planning. It makes coordination between designers, builders and component manufacturers particularly important.

 A bracket that connects two assemblies, for example, needs to suit the intended fixing arrangement and installation sequence. A folded flashing needs to accommodate the adjoining materials and provide the weather protection required by the design.

 Manufacturing components to approved drawings helps ensure they are suitable for the next stage of assembly. Structural and weatherproofing requirements must also be addressed through the appropriate design and compliance processes.

 For modular manufacturers, involving specialist fabricators during component development can help establish which cutting, bending and joining methods are appropriate before production begins.

 

## Supporting a changing construction industry

 Victoria’s modular housing programme highlights a broader shift towards manufacturing more building components before they arrive on site.

 As builders explore off-site construction, access to specialist metal fabrication services can support the development of practical, repeatable building systems.

 Based in Carrum Downs, PPC Laser provides laser cutting, CNC bending and other [metal fabrication services](https://ppclaser.com.au/applications/) for construction and manufacturing applications.

 For builders and manufacturers developing prefabricated components, the PPC Laser team can discuss project drawings, material requirements and suitable manufacturing methods to help turn designs into finished metal parts.